中文
中文English

水性PU面层加工技术

水性

加工环境更环保

返回列表

产品介绍详细说明产品规格

森欧水性PU产品在生产加工环节实现了全方位的环保升级。
Senou water-based PU products have achieved comprehensive environmental upgrades in the production and processing process. 
产品以去离子水作为分散介质,完全替代传统溶剂型PU使用的DMF、甲苯等有机溶剂,从源头上杜绝了VOCs排放。生产过程中无刺激性气味挥发,不仅显著改善车间工作环境,保障员工健康,更彻底消除了可燃性溶剂带来的安全隐患。同时,水性体系使烘干温度降低20%-30%,大幅减少能耗,且设备清洗只需水基清洗剂,废水更易处理或循环利用,真正实现清洁化生产。
The product uses deionized water as the dispersion medium, completely replacing traditional solvent based PU with organic solvents such as DMF and toluene, and eliminating VOCs emissions from the source. There is no irritating odor volatilization during the production process, which not only significantly improves the working environment of the workshop and ensures the health of employees, but also completely eliminates the safety hazards caused by flammable solvents. At the same time, the water-based system reduces the drying temperature by 20% -30%, significantly reducing energy consumption, and equipment cleaning only requires water-based cleaning agents, making wastewater easier to treat or recycle, truly achieving clean production.
常规厚度:0.6-1.2mm
常规克重:500-800g/m
2门幅可实现:≤1.4m常规厚度:0.6-1.2mm
常规克重:500-800g/m
2门幅可实现:≤1.4m

Conventional thickness: 0.6-1.2mm

Conventional weight: 500-800g/m

2 door widths can achieve: ≤ 1.4m, conventional thickness: 0.6-1.2mm

Conventional weight: 500-800g/m

2 door widths can achieve: ≤ 1.4m

关注我们:

分享到:

Copyright 2022 森欧汽车内饰材料(江苏)有限公司 . All Rights Reserved 沪ICP备18043430号-1 . Designed by Wanhu.